Change Currency



Your shopping basket is currently empty.

Owatrol Oil Paint Conditioner & Rust Inhibitor 1L

Product Code: HA3521
Owatrol Oil Paint Conditioner & Rust Inhibitor 1L

Description:

Use as an additive for any oil based paint, varnish etc, it....
  • Minimises or eliminates brush marks.
  • Makes paint flow - No pull or drag.
  • Will not dull the gloss finish like white spirit.
  • Increases hiding power especially on low hide colours like red etc.
  • Increases actual paint coverage by up to 25% or more.
  • Makes paint STICK.
  • Eliminates peeling, on sills etc.
  • Adds to paint quality for long lasting finish.
  • Keeps wet edge open longer. Ideal for special effects etc.
  • Makes paint brushable in cold or warm conditions.
Used alone, it....
  • Gives a lovely rustic appearance on indoor wood.
  • Protects tools, bicycles, equipment ext from rust and corrosion.
  • Seals wood, stone and other porous surfaces.
  • Polishes marble etc.
  • Effective solution for rust, drives out moisture and air. Leaves a tough flexible film in its place. Add Owatrol Oil to subsequent coats for longer lasting and added protection.
Directions for use:-
To condition paint:
  1. Prepare surfaces as per instructions on paint can.
  2. Apply paint.
  3. If paint is sticky, sets-up or drags add Owatrol Oil until the paint works smoothly, easily and evenly. Allow the brush, roller or spray to be your guide.
As a guide: Topcoat:
Undercoat:
Primer:
 As required. Normally 5-20 % by volume.                                                                              
Up to 30 % by volume.
Up to 50 % by volume.
  • For damaged, soft or flaky wood use Owatrol Oil to form a firm foundation for the paint.
  • Apply Owatrol Oil neat, 2-4 applications wet on wet, as fast as the wood will absorb it, wipe up any excess and allow to dry overnight (12 hours).
  • Apply paint as normal.
  • NOTE: Owatrol Oil may be added to any coating where the clean up is with white spirit.
To treat rusted surfaces:
  1. Ensure surface is dry and free from oil and grease.
  2. Remove any loose or flaky material. Do not remove firm rust.
  3. Apply Owatrol Oil wet on wet, as fast as rust will absorb it until an even sheen is achieved.
  4. Leave to dry (24 hours).
  5. Apply finish coats.
For lightly rusted surfaces use a mixture of 1 part Owatrol Oil to 2 parts Metal Primer. Do not mix or overcoat Owatrol Oil with paints containing 'hot' solvents i.e.. Xylene or two part coatings.

Coverage: approx. 18m²/ 1L.
Application temperature: between 5ºC - 35ºC.

Free UK Delivery
on orders over £100
Our Price: £19.46

 

(Not checkout offer codes!)