Home > Antifoul, Paint & Varnish > International Paint

Description:

---

Product Description:
Brightside is a superior quality polyurethane glass yacht enamel for all substrates above the waterline. It's Teflon® - containing formula produces an easy-clean, tough finish, resistant to abrasions, stains, chemicals and dirt. For detailed product information refer to www.yachtpaint.com.

Application Details: - Brightside

• Area: Above the waterline
• Finish/Sheen: High Gloss
• Thinner/ Cleaner: YTA333 Thinners No.333
• Number of Coats: Minimum of 2
• Method of application:  Brush, Roller, airless spray, conventional spray

Drying/ Overcoating Information:

Temperature ºC	Touch Dry	Overcoating Time
		Minimum	Maximum
5ºC	5 hours	36 hours	4 days
15ºC	2.5 hours	16 hours	3 days
23ºC	2 hours	12 hours	2 days
36ºC	1 hour	8 hours	1 day

PREVIOUSLY PAINTED SURFACES:	In Good Condition: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 280-320 grade (grit) paper. In Poor Condition: Remove all previous coatings and prime the substrate.
PRIMING:	All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE WOOD:	Prime with Yacht Primer or UCP.
STEEL:	Prime with Yacht Primer or Interprotect.
ALUMINIUM:	Pre-prime using Etch Primer, then prime with Yacht Primer or Interprotect.
GRP:	Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-220 grade paper. No priming necessary.
ALL SUBSTRATES:	Use Pre-Kote undercoat.

Application:

1. Abrade undercoat 320-400 grade wet  or dry paper and remove dust.
2. Apply a minimum 2 coats of Brightside in dry, well ventilated conditions.
   

• Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure.

Coverage: 10m²/ 750ml

HELPLINE: 02380 21 31 46 - www.yachtpaint.com. For Safety Data Sheet please click here.