Hempel High Protect 750ml
Processing...
new

Hempel High Protect 750ml

£34.99 £28.99
You save: £6.00  (17.15%)

mth35651-750x

Qty


Marine Miles:

Marinestore miles reward your loyalty with future discounts at the checkout. 200 miles earned equal a £1 reward discount. T&C’s apply - click here

This item is worth 145 Marine Miles points!

  • Details

Description

Hempel High Protect, formerly known as Gel Protect, is a system for the protection against and treatment of osmosis. It is a high build two component solvent free epoxy. High Protect is easy to apply, with a long overcoating window and good tolerance to environmental conditions. Drying to a very high film thickness, it can be used as a substitute for light primer when solvent emissions are a consideration. Suitable for use above and below the waterline.

Preparation and Applications

Ensure hull is suitably prepared and all surfaces are clean, oil free and dry
Stir all products well before use
If overcoating times are exceeded, abrade the surface and wash off with fresh water
To ensure maximum pot life, empty mixed contents promptly in to the paint tray
Only mix the amount of material that can be applied within the pot life time

For osmosis protection
Fill and fair as necessary with Epoxy Filler
Then apply 2 coats of High Protect For osmosis treatment Apply a primer coat of High Protect
Fill and fair as necessary with Epoxy Filler
Apply further coats of High Protect as necessary to recommended film thickness of 3 to 4 coats
Overcoat with Underwater Primer, followed by 2 coats of Antifouling Mixing

Mix ratio is 3 parts base to 2 parts curing agent by volume. Add curing agent to base and stir well. For best results allow mixed paint to rest for several minutes before use to allow air bubbles to escape. Do not thin.

Application

Roller, laying off with brush if necessary Tool cleaner use Thinners No.5 Coverage of 5m squared per 1L at 200 microns Minimum application temperature of 5 degrees C or 40 degrees F Pot life of 1 hour

Temp Touch Dry Overcoating Time
GelProtect
on to GelProtect
Overcoating Time
Underwater Primer
on to GelProtect
Min Max Min Max
10-50C 22 hours 18 hours 11 days 18 hours 27 hours
20-68C 11 hours 8 hours 5 days 8 hours 12 hours

For more detailed information on painting and additional product information please telephone Hempel on 01489 864440.

Product Reviews

No Reviews Yet!