TruDesign GRN Skin Fitting Tail 19mm 0.75 inch BSP  White
Processing...

TruDesign GRN Skin Fitting Tail 19mm 0.75 inch BSP White

£8.02 £7.22
You save: £0.80  (9.98%)

cu58089-1

Qty


Marine Miles:

Marinestore miles reward your loyalty with future discounts at the checkout. 200 miles earned equal a £1 reward discount. T&C’s apply - click here

This item is worth 35 Marine Miles points!

  • Details

Description

New Zealand designed and manufactured, moulded from a glass-reinforced nylon composite the skin fitting nut and body. High strength, high-modulus glass fibres give very high strength, rigidity, toughness and consistent sizing. The use of a composit such as this gives a huge reduction in weigth over bronze, DZR and stainless fittings without sacrificing performance.

The long standing problem of dezincification of hull fittings is a thing of the past. No more much feared pink disintegration of your valves and hosetails. TruDesign Skin Fittings completly remove the corrosion and electrical bonding problems associated with metallic fittings.

TruDesign Skin Fittings are certified by the International Marine Certification Institute (IMCI) & Bureau Veritas to meet; ISO 9093-2 Small craft deg Seacocks and through-hull fittings deg Part 2: Non-metallic

When used in below the waterline the Ball Valve should be connected directly to the skin fitting to meet safety requirements and meet marine standard compliance. 
  • Compatible with all hull types - Can be used on aluminium, steel, wood or GRP hulls
  • Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion
  • Chemical resistant - Impervious to diesel, petrol and antifouling paints
  • UV resistant - Will not degrade or discolour with ultraviolet light from the sun
  • High quality surface finish - Will not discolour with green film as similar bronze fittings do
  • Paintable - Can be painted with all types of antifouling
  • Manufactured from a glass-reinforced nylon composite
  • High strength and light weight
The TruDesign range of skin fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
They also comply with ABYC H-27

Product Reviews

No Reviews Yet!