Owatrol Marine Oil Paint Conditioner and Rust Inhibitor 500ml

Owatrol Marine Oil Paint Conditioner and Rust Inhibitor 500ml

£17.68 £16.99
You save: £0.69  (3.90%)



Marine Miles:

Marinestore miles reward your loyalty with future discounts at the checkout. 200 miles earned equal a £1 reward discount. T&C’s apply - click here

This item is worth 85 Marine Miles points!

  • Details


Use as an additive for any oil based paint, varnish etc, it....
  • Minimises or eliminates brush marks.
  • Makes paint flow - No pull or drag.
  • Will not dull the gloss finish like white spirit.
  • Increases hiding power especially on low hide colours like red etc.
  • Increases actual paint coverage by up to 25% or more.
  • Makes paint STICK.
  • Eliminates peeling, on sills etc.
  • Adds to paint quality for long lasting finish.
  • Keeps wet edge open longer. Ideal for special effects etc.
  • Makes paint brushable in cold or warm conditions.
Used alone, it....
  • Gives a lovely rustic appearance on indoor wood.
  • Protects tools, bicycles, equipment ext from rust and corrosion.
  • Seals wood, stone and other porous surfaces.
  • Polishes marble etc.
  • Effective solution for rust, drives out moisture and air. Leaves a tough flexible film in its place. Add Owatrol Oil to subsequent coats for longer lasting and added protection.
Directions for use:-
To condition paint:
  1. Prepare surfaces as per instructions on paint can.
  2. Apply paint.
  3. If paint is sticky, sets-up or drags add Owatrol Oil until the paint works smoothly, easily and evenly. Allow the brush, roller or spray to be your guide.
As a guide: Topcoat: Undercoat: Primer:
  • For damaged, soft or flaky wood use Owatrol Oil to form a firm foundation for the paint.
  • Apply Owatrol Oil neat, 2-4 applications wet on wet, as fast as the wood will absorb it, wipe up any excess and allow to dry overnight (12 hours).
  • Apply paint as normal.
  • NOTE: Owatrol Oil may be added to any coating where the clean up is with white spirit.
To treat rusted surfaces:
  1. Ensure surface is dry and free from oil and grease.
  2. Remove any loose or flaky material. Do not remove firm rust.
  3. Apply Owatrol Oil wet on wet, as fast as rust will absorb it until an even sheen is achieved.
  4. Leave to dry (24 hours).
  5. Apply finish coats.
For lightly rusted surfaces use a mixture of 1 part Owatrol Oil to 2 parts Metal Primer. Do not mix or overcoat Owatrol Oil with paints containing 'hot' solvents i.e.. Xylene or two part coatings.

Coverage: approx. 18m/ 1L. Application temperature: between 5C - 35C.

Available in the UK ONLY Due to shipping restrictions on this product we can only economically deliver this to UK destinations. It is possible to ship overseas but the cost can be very high.
We can provide a quote for this, please contact us.

Product Reviews

★★★★★ ★★★★★
4.50/5 Stars out of 2 Reviews
Verified Buyer
guest | February 1st, 2012
I give this product 5 stars.
Verified Buyer
guest | February 5th, 2012
Helps to create a lovely finish.