Hempel Epoxy Filler 130ml
Processing...

Hempel Epoxy Filler 130ml

£15.99 £14.49
You save: £1.50  (9.38%)

mth3253-19810-130

Qty


Marine Miles:

Marinestore miles reward your loyalty with future discounts at the checkout. 200 miles earned equal a £1 reward discount. T&C’s apply - click here

This item is worth 70 Marine Miles points!

  • Details

Description

A two pack, epoxy filler for use above and below the waterline. Base 65ml - 130ml mixed volume.

Preparation and Applications:

  • Ensure all surfaces are clean, oil free and dry.
  • Clean with Degreaser or Yacht Cleaner.
  • Stir all products well before use.
  • If overcoating times are exceeded, abrade the surface and wash off with fresh water.
On a previously coated surface:
  1. Abrade to remove loose matter and provide a suitable key.
  2. Wash surface with fresh water and allow to dry.
  3. Apply Epoxy Filler up to a thickness of 5mm, fair before overcoating with the relevant primer.
On a previously uncoated surface:
  1. Apply one or two coats of Primer before applying Epoxy Filler, then apply further coats of Primer.
  2. Apply 2 coats of Bilge and Locker Paint.
  3. Thinners can be used to assist application under certain conditions.
Mixing: Immediately before use, mix equal parts of the two components until a uniform colour is obtained. Avoid bubbles in the mixture.

Application method: Filler knife, spatula, trowel Coverage: 1m²/ 1L @ 1mm thickness Minimum application temperature: 5ºC / 40ºF

Product Reviews

No Reviews Yet!