Hempel Light Primer 2.5 Litre

Hempel Light Primer 2.5 Litre

£83.50 £72.29
You save: £11.21  (13.43%)



Marine Miles:

Marinestore miles reward your loyalty with future discounts at the checkout. 200 miles earned equal a £1 reward discount. T&C’s apply - click here

This item is worth 360 Marine Miles points!

  • Details


Blakes Hempel's Light Primer is a two pack, high build, solvent based primer and undercoat for the protection of all substrates above and below the waterline. Particularly suitable for aluminium and as a primer for keels and rudders.

Preparation and Applications:

  • Ensure all surfaces are clean, oil free and dry.
  • Clean with Degreaser or Surface Cleaner.
  • Stir all products well before use.
  • If overcoating times are exceeded, abrade the surface and wash off with fresh water.
On a previously coated surface:
  1. Abrade to remove loose matter and provide a suitable key.
  2. Wash surface with fresh water and allow to dry.
  3. Apply Epoxy Primer Undercoat as required, followed by the relevant topcoat..
On a previously uncoated surface:
  • Prime porous surfaces with one coat of Epoxy Primer Undercoat thinned 20% with Thinners No.5.
  • Then apply 5 coats or Epoxy Primer Undercoat before applying the required top coat or tie coat.
  • Thinners can be added to assist application under certain conditions.
  • Mix ratio is 2 parts base to 1 part curing agent by volume.
  • Thoroughly mix the base, add the curing agent and stir well.
  • For best results allow mixed paint to rest for several minutes before use to allow air bubbles to escape.
Application method: Brush/ Roller/ Pad/ Spray Thinners and Tool Cleaner: Thinners No.5 (brush/ roller/ pad) up to 10%, (spray) up to 40% Coverage: 8.5m²/ 1L Minimum application temperature: 5ºC- 40ºC

Minimum 10ºC- 50ºC 4 hours 8 hours 60 days
20ºC- 68ºC 2 hours 4 hours 30 days

Product Reviews

No Reviews Yet!