Epifanes Woodfinish Gloss Varnish For Teak 1 Litre Product Code: mwe4

Woodfinish gloss varnish for teak 1 litre

• Clear, high gloss finish suitable for all types of wood
• Because of it's microscopic porosity properties, this finish ensures good adhesion on oily and vaporous woods like teak and iroko (not suitable for bankirai)
• Due to its unique formulation, this finish does not require sanding between coats (provided recoating occurs within 72 hours)
• For use on bare wood and/ or the maintenance of existing, intact oil or varnish systems
• It is compatible with conventional varnish
• Woodfinish Gloss provides a quick, easy approach to a superior, high gloss finish without sacrificing integrity or longevity
• Provides maximum UV protection in all climates

Surface preparation:

• Clean wood and sand surface using 180 grit dry abrasive paper
• Degrease thoroughly with Epifanes Spray Thinner for Paint and Varnish, or other suitable degreaser and allow to evaporate completely
• Remove all dust
• Do not use water!

Application on Teak, Iroko and other oily woods:

On bare wood, apply first coat thinned 25%

Apply an additional 4-5 coats thinned 0-5% allowing 24 hours cure time (65F) between coats/li

Application on Mahogany and other non-oily woods:

On bare wood, apply first coat thinned 50% allowing 24 hours cure time and sand with 280 grit dry abrasive paper

Apply second coat thinned 25% allowing 24 hours cure time and sand with 320 grit dry abrasive paper

Apply third second coat thinned 10% allowing 24 hours cure

Apply at least an additional 5 coats thinned 0-5% allowing 24 hours cure time between coats

Sanding before final coat (400 wet) is recommended to maximize the overall appearance of the finish

• Stir well prior to use
• Do NOT over brush Epifanes finishes
• May be over coated with Woodfinish Matte, Clear Varnish., Rubbed Effect Interior Varnish or Aqua marine Interior Varnish
• Woodfinish appears milky in the can, but dries clear

Maintenance:

• When a decrease in the quality of the finish is noticed, sand the surface with 320 grit paper and apply one or two fresh coats

Thinning:

• Epifanes Brush Thinner for Paint and Varnish or a good quality mineral spirit or turpentine. Spray thinner for Paint and Varnish/li

Coverage: Approx. 12mandsup2;/ 1L.