Barton Mainsheet System Size 1 2:1 Cleats 70deg on End Fittings Product Code: plb20900

Mainsheet System Size 1 2:1 Purchase with Cleats at 70deg on End Fittings.

Travellers, end fittings and track are all extruded from top quality marine grade aluminium and finished in Barton's unique 'Spectro' grey anodised finish.;; Sliding bolt track allows for a smooth, clean profile and also make retro-fitting easier as bolts can be slid along the extrusion to match existing fastening holes. Available in 2:1 or 4:1 purchase systems

• Recirculating precision ground Delrin ball system;>
• Traveller car with single shackle take off
• Pair of end fittings
• Pair of plastic end caps
• Pilot track and fitting instruction
• Maximum Boat Size Metres ;;; 8.5
• Track Width ;;; 20 mm
• Track Length ;;; 1.4 m
• Maximum Control Line Diameter ;;; 6 mm
• Safe Working Load ;;; 500 Kgs
• Fastenings Diameter ;;; 5 mm
• Size 1 2:1

Important Note: Suggested boat sizes are given as guidance only and assume a monohull with boom end sheeting, loaded vertically to the traveller. Mid-boom sheeting and severely angled take offs can impose greater loads and suitable allowances should be made for this. If at all unsure of your choice it is important to seek further advise. If you are close to the maximum boat size suggested, we would advise upgrading to the next size up. complete pack kits are not suitable for open span applications as they require beam section track.
Download diagram - 2:1 Traveller cleats on end.