Description
CHOK-A-BLOK is a tough polypropylene webbing guard, protects any load from strap damage. Fits webbing sizes 25 & 38mm. Guard width 43mm and length 160mm.
Strap sizes 25mm (1 ) to 38mm (1.5 ) use product PBED-CB0380.
Strap sizes 35mm (1.5 ) to 50mm (2 ) use product PBED-CB0500.
Key Features of the Strap Guard
; Clips easily onto the webbing strap.
; Light weight and stays in place on the strap throughout the important stage of strap positioning.
; Easily positioned by sliding along the strap to the points of contact.
; Additional units can be added to extend the area of coverage.
; Because the foam has a closed cell structure it is resistant to the ingress of moisture and solid debris.
; As tension is applied to the strap, frictional damage to the surface of the cargo is eliminated because the strap easily slips across the polypropylene top surface.
The need to protect the cargo and the webbing strap has been the paramount objective in both the design and selection of materials in the manufacture of the CHOK-A-BLOK strap guard.
To protect the cargo, a medical grade foam is used. The foam is formed by creating bubbles of environmentally inert nitrogen within polyethylene, resulting in a highly pure foam which will not cause corrosion or silver staining, it is lightweight, tough, flexible, C.F.C. & H.C.F.C. free, chemically inert, non toxic and resistant to moisture, oils, solvents, dilute acids and UV light.
The webbing strap clip section is made from polypropylene, it is flexible even at low temperatures, it is chemical resistant to most acids, oils and fuels, this material is also used for automotive battery cases therefore ideally suited for use in the challenging conditions of the haulage and transport industry.
The combination of these two materials provides a balance of toughness and softness that is unique to CHOK-A-BLOK
Note:
It is the responsibility of the user to ensure the product is suitable for a particular application, its safe use and environmental exposure. The foam can be deformed or damaged by a combination of high strap tension and point loading. We believe it to be good practice to periodically check for any signs of degradation or wear.
- Anti-wear sleeve that can follow the contour of any load,>
- Flexing and bending to help maintain exceptional security,>
- Eliminates damage to finished surfaces,>
- Protects webbing from damage,>
- Allows high webbing tension for maximum security,>
- Easy to slip onto webbing strap and can be butt-jointed to extend protection,>
- Protective Plastazote foam is inert and will not cause corrosion or staining
Strap sizes 25mm (1 ) to 38mm (1.5 ) use product PBED-CB0380.
Strap sizes 35mm (1.5 ) to 50mm (2 ) use product PBED-CB0500.
Key Features of the Strap Guard
; Clips easily onto the webbing strap.
; Light weight and stays in place on the strap throughout the important stage of strap positioning.
; Easily positioned by sliding along the strap to the points of contact.
; Additional units can be added to extend the area of coverage.
; Because the foam has a closed cell structure it is resistant to the ingress of moisture and solid debris.
; As tension is applied to the strap, frictional damage to the surface of the cargo is eliminated because the strap easily slips across the polypropylene top surface.
The need to protect the cargo and the webbing strap has been the paramount objective in both the design and selection of materials in the manufacture of the CHOK-A-BLOK strap guard.
To protect the cargo, a medical grade foam is used. The foam is formed by creating bubbles of environmentally inert nitrogen within polyethylene, resulting in a highly pure foam which will not cause corrosion or silver staining, it is lightweight, tough, flexible, C.F.C. & H.C.F.C. free, chemically inert, non toxic and resistant to moisture, oils, solvents, dilute acids and UV light.
The webbing strap clip section is made from polypropylene, it is flexible even at low temperatures, it is chemical resistant to most acids, oils and fuels, this material is also used for automotive battery cases therefore ideally suited for use in the challenging conditions of the haulage and transport industry.
The combination of these two materials provides a balance of toughness and softness that is unique to CHOK-A-BLOK
Note:
It is the responsibility of the user to ensure the product is suitable for a particular application, its safe use and environmental exposure. The foam can be deformed or damaged by a combination of high strap tension and point loading. We believe it to be good practice to periodically check for any signs of degradation or wear.
- Brand: EDEC
- Manufacturer: EDEC
- Manufacturers Part Number: cb0380
- EAN Barcode: 5024220858031
Reviews
There are no reviews for this item yet.