Description
Broads antifoul is a medium strength copper based antifoul, suitable for use in salt and fresh water. Suitable for all substrates except aluminium, for use below the waterline.
Preparation and Application
Preparation and Application
- Ensure that all surfaces are clean, oil free ad dry
- Clean with Pre-Clean
- On a previously coated surface, wet abrade to remove any loose matter and to provide a suitable key
- Wash surface with fresh water and allow to dry
- Apply 2 coats of Broads Antifoul with an additional coat around the leading edges and other high wear areas
- On substrates that have not previously been antifouled, prime prepared surface with 1 coat of Underwater Primer the apply 2 coats of Broads antifouling
- Thinners can be added to assist application under certain conditions
- Stir all products before use
- Launch boat within 2 weeks
- Application Method: Brush or Roller or Pad or Spray
- Thinners and Tool Cleaner: No 3 Thinners up to 5%>
- Coverage: 12.8m-squared/litre
- Min Application Temp: 5 degree Celsius 40 Fahrenheit
- Available for UK mainland delivery only