Hempel Cruising Performer Antifouling Product Code: mth7168e--xv

Cruising Performer Antifoul is a self polishing erodible antifouling which is formulated to give optimum performance in all cruising areas. Suitable for use on all substrates except aluminium. For use below the water line.

Preparation and Application

Ensure all surfaces are clean, oil free and dry

Clean

On previously coated surfaces, wet abrade to remove all loose matter and to provide a suitable key

Wash surface with fresh water and allow to dry

Apply 2 coats of Cruising Performer with an additional coat around the leading edges and other high wear areas

On substrates that have not previously been antifouled, prime prepared surface with 1 coat of; underwater primer then apply 2 coats of Cruising Performer

Stir all products well before use

Launch vessel within 3 months

Application method of Thinner 808 (no 3)>

Coverage of 12.5m2 per litre

Min application temperature of 5 degrees Celsius, 40 degrees Fahrenheit

PLEASE NOTE that white antifoul when applied may look grey. Once immersed it looks white.