Description
A two pack, epoxy filler for use above and below the waterline. Base 65ml - 130ml mixed volume.
Preparation and Applications:
Application method: Filler knife, spatula, trowel Coverage: 1m / 1L @ 1mm thickness Minimum application temperature: 5 C / 40 F.
Preparation and Applications:
- Ensure all surfaces are clean, oil free and dry/li
- Clean with Degreaser or Yacht Cleaner
- Stir all products well before use
- If over coating times are exceeded, abrade the surface and wash off with fresh water
- Abrade to remove loose matter and provide a suitable key
- Wash surface with fresh water and allow to dry
- Apply Epoxy Filler up to a thickness of 5mm, fair before over coating with the relevant primer/li
- Apply one or two coats of Primer before applying Epoxy Filler, then apply further coats of Primer/li
- Apply 2 coats of Bilge and Locker Paint
- Thinners can be used to assist application under certain conditions
Application method: Filler knife, spatula, trowel Coverage: 1m / 1L @ 1mm thickness Minimum application temperature: 5 C / 40 F.