Hempel Light Primer Product Code: mth45551-11630--xv

Light Primer is a two pack, high build, solvent based primer and undercoat for the protection of all substrates above and below the waterline. Particularly suitable for aluminium and as a primer for keels and rudders.

Preparation and Applications:

• Ensure all surfaces are clean, oil free and dry/li
• Clean with Degreaser or Surface Cleaner
• Stir all products well before use
• If over coating times are exceeded, abrade the surface and wash off with fresh water/li

On a previously coated surface:

Abrade to remove loose matter and provide a suitable key

Wash surface with fresh water and allow to dry

Apply Epoxy Primer Undercoat as required, followed by the relevant topcoat./li

On a previously uncoated surface:

• Prime porous surfaces with one coat of Epoxy Primer Undercoat thinned 20% with Thinners No.5
• Then apply 5 coats or Epoxy Primer Undercoat before applying the required top coat or tie coat
• Thinners can be added to assist application under certain conditions

Mixing:

• Mix ratio is 2 parts base to 1 part curing agent by volume
• Thoroughly mix the base, add the curing agent and stir well
• For best results allow mixed paint to rest for several minutes before use to allow air bubbles to escape

Application method: Brush/ Roller/ Pad/ Spray Thinners and Tool Cleaner: Thinners No.5 (brush/ roller/ pad) up to 10%, (spray) up to 40% Coverage: 8.5m / 1L Minimum application temperature: 5 C- 40 C.