Description
60mm Synchro Halyard Block
Synchro Blocks combine scientifically optimised block geometry, a Free-Spin bearing and self-aligning head to reduce friction and increase efficiency by up to 40% over budget blocks on mainsheet systems. With each component perfectly synchronised with the movement of the rope, the result is an easier, smoother transfer of power from deck to sail and less wear on your rope. These plain bearing blocks are typically used for heavy and static loads in halyard tuning, mainsheets systems, mast foot blocks, mast head blocks and boom vangs. Synchro blocks are equipped with stainless steel straps for improved strength and service life whilst stiff glass fibre reinforced cheeks prevent lines from wedging. The innovative design has a Tool-Free sliding swivel locking mechanism, a simple switch changes from a swivelling to fixed shackle. The toggle head of the halyard block has been designed to fit on the studs commonly found at mast bases - Nb: check the diameter of the stud against the width of the block jaws and pin diameter.
Synchro Blocks combine scientifically optimised block geometry, a Free-Spin bearing and self-aligning head to reduce friction and increase efficiency by up to 40% over budget blocks on mainsheet systems. With each component perfectly synchronised with the movement of the rope, the result is an easier, smoother transfer of power from deck to sail and less wear on your rope. These plain bearing blocks are typically used for heavy and static loads in halyard tuning, mainsheets systems, mast foot blocks, mast head blocks and boom vangs. Synchro blocks are equipped with stainless steel straps for improved strength and service life whilst stiff glass fibre reinforced cheeks prevent lines from wedging. The innovative design has a Tool-Free sliding swivel locking mechanism, a simple switch changes from a swivelling to fixed shackle. The toggle head of the halyard block has been designed to fit on the studs commonly found at mast bases - Nb: check the diameter of the stud against the width of the block jaws and pin diameter.
- Larger sheave diameter minimises rope friction
- High density free-spin bearing - reduces axle diameter for superior efficiency
- Simple head locking switch;
> - Sheave: 60mm
- Working load limit: 800kg
- Weight: 122g
- Width of block jaws A: 15mm
- Pin diameter B: 6mm
- Space to pin C: 6.9mm
- Model:60mm Synchro Halyard Block
- Part no 29926021BK
>