Description
Seaflo bilge water alarm system consists of an electronic water level sensor and water alarm with two warning alerts, an 85dB alarm and a red LED signal. When the electronic water detector senses the water level has reached an unsafe level the switch is activated. Once the water level has receded, the alarm and light are automatically switched off. A three second delay feature is incorporated to safeguard against false starts. The alarm is activated if the water level reaches 41mm and deactivates when it returns to 9.5mm. The water level detector is completely sealed, does not come into contact with water and will not corrode. Oil and debris will not affect it.
- Detects water sending signal to alarm
- Rated for bilge pumps up to 20A at 12V>
- Switch activated at 41mm and deactivated when level down to 9.5mm
- 3 second delay feature
- Sealed fluid detector, will not corrode or be affected by oil or debris
- Environmentally safe
- No moving parts
- No mercury
- Voltage: 12V>
- Max. amps: 20A>
- Alarm volume: 95dB min
- Wire: 18 AWG x 1m (Switch)>
- Part no. WAS12001