Description
TruDesign Load Bearing Collars are designed for use with TruDesign Skin Fittings and Ball Valves. Giving that extra level of safety performance to the underwater fittings.
With the collar in place, the skin fitting-ball valve and combined hose tail assembly will withstand a; 227 kg (0.25 ton) static force applied to the hose tail end of the assembly for a minimum of 30 seconds. This complies with North American ABYC H-27 standards.
The TruDesign 2" Skin Fittings meet the requirements of H-27 as standard (i.e. without a Large Collar installed). Adding a Large Collar to assemblies of this size increases the overall strength and protects the vulnerable exposed section of thread on the Skin Fitting.
With the collar in place, the skin fitting-ball valve and combined hose tail assembly will withstand a; 227 kg (0.25 ton) static force applied to the hose tail end of the assembly for a minimum of 30 seconds. This complies with North American ABYC H-27 standards.
The TruDesign 2" Skin Fittings meet the requirements of H-27 as standard (i.e. without a Large Collar installed). Adding a Large Collar to assemblies of this size increases the overall strength and protects the vulnerable exposed section of thread on the Skin Fitting.
- Compatible with all hull types - Can be used on aluminium, steel, wood or GRP hulls >
- Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion >
- Chemical resistant - Impervious to diesel, petrol and antifouling paints >
- UV resistant - Will not degrade or discolour with ultraviolet light from the sun >
- Excellent surface finish - it won't discolour >
- Can be painted or anti fouled if needed>
- Manufactured from a glass-reinforced nylon composite>
- High strength and light weight >
- Size Medium for 1 1/4 , 1 1/2 inches>
- Weight 165g / 5.8 oz
>