Jump to the main content

Secure Checkout

Barton Laser Replica Cleat Base Assembly

Thumbnail Filmstrip of Barton Laser Replica Cleat Base Assembly Images

    Purchase Barton Laser Replica Cleat Base Assembly

    Barton Laser Replica Cleat Base Assembly Product Code: plb98078

    £88.34 £79.59

    You Save: £8.75 (around 10%)

    Buy this and earn 397 Marine Miles.
    No reviews yet. Write a review!
     

    Description

    Kit Contents:
    • cleat base with two fixing holes
    • 2 x 70100: K Cam Mini Cleats
    • 2 x 70105: K Cam Pillar Fairleads


    Fitting Instructions:
  • For very old lasers, you can use the original fixing holes for the alloy Clamcleat. If not fitted, position cleat base behind mast along the centreline, measure 437mm back from the mast slot and drill a 4mm pilot hole to accept a 5mm self tapping screw (not supplied)
  • Loosely fit the screw then align again along the centreline; mark then drill the second fixing hole
  • Remove the cleat base and seal the screw holes with sealant before final fitting/li
  • .
    • Brand: Barton Marine Equipment Limited
    • Manufacturer: Barton Marine Equipment Limited
    • Manufacturers Part Number: 98078
    • EAN Barcode: 5035088980789

    Video

    Reviews

    There are no reviews for this item yet.

    Your Rating of Barton Laser Replica Cleat Base Assembly

    To rate, click/tap a star below. 1 star is the worst and 5 gold stars is the best.

    • All fields above are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Enter only the red underlined text:  3Ry1731751Arq!



    Related Products