Barton Laser Replica Mast Base Assembly Product Code: plb98077

Laser Replica Mast Base Assembly Kit Contents:

• stainless steel Mast Base Plate with two loops
• 2 x 00110: Series 0 Blocks

Fitting Instructions

Place the mast base plate along the centreline of the boat behind the mast slot so that the loops are aligned fore and aft/li

Measure 24mm from the back of the mast slot along the centreline and draw a position line at right angles

Introduce the mast base plate, centre, then mark the two fixing holes/li

Drill two 4mm pilot holes, put sealant in the screw holes then affix with 5mm self tapping screws (not provided). NB: On very old Lasers, you can use the original screw holes where the bulls eye attaches/li

Additional Information:

Distance from back of mast slot to centreline of mast base plate fixing screws - 24mm.