Description
The compact Seaflo 13B series bilge pump uses an inbuilt electronic sensor to regulate it's operation eliminating the need for a separate float switch. The pumps impeller is set to turn for half a second every 2.5 minutes, if it senses any resistance it will continue pumping until all the water is removed but is also equipped a back-up feature that prevents it running continuously if the sensor is fouled by loose debris. Back flow is prevented by an internal check flow valve. The robust pump is entirely submersible, uniquely sealed with ignition protect and is quiet in operation. A snap-off strainer and easily removable impeller make maintenance easy. The pack contains a removable threaded straight body outlet. A split quick connect joint with 360 degree rotation is available separately allowing the pump to be disconnected easily without affecting the plumbing. Seaflo 13B series bilge Pump is available in wide range of options with flow rates from 600-200 gallons per hour / 2271-7570 litres per hour and 12 or 24 volts.
- Electronic timer sensing automatic bilge pump>
- Float switch not required>
- Removable strainer/impeller area>
- Easy maintenance>
- Robust, long life engine>
- Fully submersible with unique moisture-proof seal>
- Ignition protected and fireproof>
- Anti-airlock protection>
- Enclosed marine grade silicone, tin plated wiring>
- Check valve prevents any water back flow>
- Back up feature prevents continuous running if fouled by debris>
- Flow rate: 1100 gph /4164 lph>
- Volts:12v>
- Current: 4.0A>
- Head: 4m / 13'>
- Outlet: 25mm / 1" >
- Wire 18 AWG x 1m>
- Weight: 0.4g>
- Model: BP1G110013B>